Drum digital printing machine has always been the favorite of the textile industry, the clothing industry, most people have changed with the roller digital printing machine to do the primary print things, so not only save a lot of time, manpower and material resources, the more Thereby improving the operation power.
The principle of maintenance when using the roller digital printing machine:
First, the drum digital printing machine can not prevent anything, also is the liquid.
Second, at least one week to empty a waste ink barrel waste ink, to prevent overflow.
Third, the interior to dust, smoke-prone and can not be put together with the dust machine.
Fourth, the computer must be top of the anti-virus, with a RIP software, the computer must be closed when the firewall.
5, drum digital printing machine can not have near the commonly used household appliances, to stay away from the large magnetic field, electric field.
6, the machine ink should be stored in a cool place to avoid direct sunlight. Ink is best used in half a month after opening.
7, try to keep a constant temperature and humidity, under normal circumstances, the temperature is about 25 degrees, humidity is about 60% of the best.
Eight, at least once a week to check the flash spray and scraping the clean state, if hair and other debris, please use tweezers or tissues to debris removal.
9, when many times after cleaning people have broken or broken line of the situation, please wait 10 minutes before work, or use the cleaning solution soak. If it is not possible to clean any of the nozzles for 5 consecutive times, contact the agent engineer.
10, roller digital printing machine must be ground. In the machine bracket at both ends of the screw connection with the host as much as possible on the face of thick copper wire, copper wire surface insulation to hang, the other end of the copper wire into the ground at least 1m, conditional access companion. Do not connect objects such as lightning rods, radiators, water pipes, etc.